44
Keep spacing between the center of the
rafters at the lower edge of the panel
and secure with one 2" nail into each
rafter
(Fig. E)
.
Move to the top of the panel and keep
spacing between the center of the
rafters. Secure with one 2" nail into
each rafter
(Fig. E)
.
Nail the roof panel using 2" nails 6" apart
on edges and 12" apart inside panel.
Attach the second
11-1/4 x 96"
lower
roof panel ush to rst panel along edge
and with the 3/4" measurement
(Fig. F)
.
3
At one end attach a lower
25-3/4 x 48"
roof
panel ush to the center panels
(Fig. G)
and
with 1/8" at gable trim
(Fig. H )
.
Nail the roof panel using 2" nails 6" apart.
Attach one upper
11-1/4 x 25-3/4"
roof panel
ush to the installed panel
(Fig. G)
and ush at
peak
(Fig. H)
and with 1/8" at gable trim
(Fig. J).
Nail the roof panels using 2" nails 6" apart.
Move to opposite end to install two more panels.
Repeat process to attach roof panels
on the opposite side.
You have nished installing
your roof panels.
4
5
PARTS REQUIRED:
ROOF PANELS
3/4"
GAUGE BLOCK
GAA
12"
(30,5 cm)
6" (15 cm)
Fig. E
24"
(61 cm)
22-1/4"
(56,5 cm)
24"
(61 cm)
22-1/4"
(56,5 cm)
24"
(61 cm)
24"
(61 cm)
NOTE:
Measurements from inside of panels
2" Nail
Flush
Fig. J
Fig. H
11-1/4"
(28,6 cm)
48"
(122 cm)
1/8" (0,32 cm)
Gable
Trim
3/4"
(1,9 mm)
3/4"
(1,9 mm)
Fig. G
7/16 x 11-1/4 x 96"
(1,1 x 28,6 x 244 cm)
3/4"
(1,9 cm)
Fig. F
DOOR
Gauge
Block
DOOR
Flush
Flush
FINISH
6
2" (5 cm) x174
Summary of Contents for Handy Home MAJESTIC 8' x 12'
Page 1: ... NN ...