14
2" (5,1 cm)
PARTS REQUIRED:
3/8 x 48 x 72"
(1 x 117,2 x 182,9 cm)
x1
x39
SIDE WALL PANELS
2 x 3 x 13" (5,1 x 7,6 x 33 cm)
x1
RK
TEMPORARY SPACER
3/4" GAUGE
BLOCK
GAA
Place (1)
48" x 72"
panel on the wall frame, as shown.
Locate the panel 1-1/2" above the top plate.
Use
RK
as a 2x3 as a gauge block for the 1-1/2" top overhang measurement.
Use the gauge block to mark the 3/4" side measurement on the wall stud.
Secure panel with (2) 2" nails in the corners
(Fig. A).
2
Secure panel with 2" nails spaced 6" apart on edges and 12" apart inside panel.
Install all wall panels with the primed side facing up.
Ensure your wall is square by installing one panel and squaring frame.
Move to the opposite end. Using the long edge of the panel as a lever,
move the panel side-to-side until you have a 3/4" measurement on the wall stud.
Secure corner with (2) 2" nails
(Fig. B)
.
3/4" Gauge
Block
3/4" Gauge
Block
For squareness maintain 3/4" and 1-1/2"
measurement along panel edge.
BEGIN HERE
3/4"
(1,9 cm)
6"
(15,2 cm)
12"
(30,5 cm)
BEGIN
1
RK
1-1/2"
(3,8 cm)
3/4"
(1,9 cm)
Fig. A
3/4"
(1,9 cm)
2 Nails
1-1/2" (3,8 cm)
Overlap
Fig. B
3/4"
(1,9 cm)
1-1/2" (3,8 cm)
Overlap
2 Nails
48" x 72"