57
Secure upper roof panels using 2"
nails 6" apart on edges and 12"
apart inside panel.
You have fi nished installing your roof panels.
Repeat process to attach roof panels
on the opposite side
(Fig. H)
.
9
9
ROOF PANELS
FINISH
11
6"
(15,2 cm)
12"
(30,5 cm)
Place a
48" x 47-7/8"
upper roof
panel,
rough side up and fl ush
with the installed panels
(Fig.C)
.
Ensure 3/4" measurement on the
rafter
(Fig. A)
.
Secure the lower edge of roof
panel using two 2" nails in
corners
(Fig. G)
.
Move up to the top of the panel
and keep spacing between the
center of the rafters
(Fig. G)
.
Secure with one 2" nail into each
rafter
(Fig. G)
.
2" Nails
2" Nails
Two Nails
NAIL
FIRST
Two Nails
NAIL
FIRST
48" x 47-7/8"
48" x 31-7/8"
7
8
3/4"
(1,9 cm)
Gauge
Block
Fig. A
24"
(61) cm)
24"
(61) cm)
NOTE:
Measurement from outside of gable.
33"
(83,8) cm)
2" Nails
STEP
Fig. G
STEP
7
8
Flush
Fig. C
Flush
Fig. C
MAINTAIN RAFTER TO
RAFTER DIMENSION
Place a
48" x 31-7/8"
upper roof panel,
rough side up and fl ush with the installed panels
(Fig.C)
.
Ensure 5/8" gap at gable end overhang
(Fig. D)
.
Secure the lower edge of roof panel using
two 2" nails in corners
(Fig. G)
.
Move up to the top of the panel and keep spacing
between the center of the rafter and gable end
(Fig. G)
.
Secure with one 2" nail into each rafter
(Fig. G)
.
5/8"
(1,6 cm)
GAP
Fig. D
Fig. H
