BACtrack S75, Owner'S Manual

10

11

Flow Detection Settings

use this option to adjust how hard a user  

is required to blow. Press start to change 

the settings.

Low level flow detection

This is the default setting for the unit.

High level flow detection

Press start to change to the high level flow 

setting.

This level requires a stronger breath by the 

user and is recommended if previous test 

attempts have been unsuccessful. 

User activated test mode

Press start again to change to the user 

activated test mode.  when testing in this 

mode, the operator must press start during 

a breath sample to activate the pump and 

perform a test.

speCIfICaTIOns

Dimensions

2.3 x 4.8 x 1 inches  

(5.8 x 12.2 x 2.5 cm)

weight

4.4 oz (125 g)  

with mouthpiece and batteries

sensor  

Technology

Fuel cell sensor technology

Detection range

0.000 – 0.400 %BaC

Test Count

Displays total number of tests performed

Power supply

Two aa alkaline batteries, included

Battery life

approximately 1500 tests

warm up Time

10-20 seconds

response Time

10 seconds

sensor  

accuracy

+/- 0.005 %BaC @ 0.1 %BaC

Operating  

Temperature

32-104 °F (0-40 °C)

BAC

BAC

BAC

BAC