PAGE 114
SERVICE MANUAL
Front Brake & Front Wheel
Front Brake Caliper:
Removal
• Place a container
under the brake
caliper, and loosen
the brake hose bolt
and finally remove
the brake hose.
CAUTIoN
• Do not spill brake fluid on painted surfaces.
• Remove two caliper
bolts and the
caliper.
Inspection
• Check brake lining
condition. Replace
the linings if the
brake linings wear limitation groove reaches to the
brake disk.
Brake lining replacement:
• Remove two guide pins.
• Compress caliper
mounting plate, and
then remove brake
linings.
• Install new linings,
and tighten the
guide pins.
Installation
• Install the brake caliper and tighten the attaching
bolts securely.
• Torque: 23 ft. lbs.
CAUTIoN
• Use M8 x 18 mm flange bolt only.
• Long bolt will impair the operation of brake disk.
• Torque: 23 ft. lbs
• Refill the brake fluid
reservoir and bleed
all air.
CHAPTER 14
STEERING/FRONT SUSPENSION
Front Differential Oil .....................................Page 115
Troubleshooting ..........................................Page 116
Front Cushion .............................................Page 116
Suspension Arm ..........................................Page 116-117
Toe-In .......................................................Page 117
Summary of Contents for 1500
