PAGE 115
Front differential oil:
CAUTIoN
• Be sure the differential set temperature is below 35°
Celsius or 95° Fahrenheit.
• Oil Standard:
SAE #90 hypoid gear oil
• Oil Capacity:
300 c.c.
• Remove the under
cover
• Place an oil
pan below the
differential set
case.
• Remove drain bolt,
filler nut and drain
oil out.
• Tighten the drain bolt
to specified torque.
• Pour the oil through
the filler hole.
• Tighten the filler
cap to the specified torque
• Drain Bolt:
24 ft.lbs
• Oil Filler Unit:
26.5 ft.lbs
Rear Differential Set:
• Place an oil pan
below the case of
final gear set.
• Remove the drain
blot.
• Remove the filler
cap
• Drain oil
• Tighten the drain
blot.
• Remove the oil
check bolt.
• Pour the specified
oil through the
filler hole until the
oil lever reaches
bottom of the hole.
• Tighten the oil level bolt.
• Tighten the filler cap.
• Final gear oil drain bolt: 24 ft/lbs
• Final gear oil filler cap:
26.5 ft/lbs
FILLER NUT----------------
OIL DRAIN BOLT--------------------
Summary of Contents for 1500
