PAGE 122
SERVICE MANUAL
Rear Brake & Rear Wheel
& Rear Cushion
Rear Wheel Axle:
• Remove rear wheel
housing 4 bolts.
• Remove rear wheel
housing from rear
fork assembly.
• Remove tow ball
mount 4 bolts (2
bolts each side).
• Remove rear axle housing
(4 bolts).
• Remove rear axle housing.
Inspection
• Check bearings on
rear wheel axle
bearing seat.
• Rotate each
bearing’s inner
ring with fingers.
• Check if bearings
can be turned
smoothly and
silently, and also check if bearing outer ring is
mounted on bearing seat.
• If bearing rotation is uneven, noisy, or loose then
replace it.
• Check oil seal for wear or damage, and replace it as
necessary.
CAUTIoN
• Never install used bearings. Once bearing
removed, it has to be replaced with new one.
• Measure the outer
diameter of the
piston. Replace
the piston if its
measured value
exceeds allowable
limit.
• Allowable limit:
• Foot brake 15.850 mm
Summary of Contents for 1500
