PAGE 23
Check and Adjustment:
Check ignition timing
Fault Condition:
Abnormal
Probable Causes:
• Faulty pulse generator
• Faulty CDI unit
Check and Adjustment:
Test cylinder compression
Fault Condition:
Abnormal
Probable Causes:
• Leaking head gasket
• Worn cylinder and piston rings
Check and Adjustment:
Check Carburetor
Fault Condition:
Clogged
Probable Causes:
• Needs Cleaned
Check and Adjustment:
Check spark plug
Fault Condition:
Fouled or discolored
Probable Causes:
• Clean the spark plug
• Spark plug is incorrect heat range
Check and Adjustment:
Check engine for overheating
Fault Condition:
Overheating
Probable Causes:
• Excessive carbon deposited in combustion chamber
• Wrong type of fuel
• Fuel / air mixture ratio is lean
• Use of poor quality fuel
Check and Adjustment:
Accelerate or run at high speed
Fault Condition:
Knocks
Probable Causes:
•
Worn piston and cylinder
•
Fuel / air mixture ratio is lean
•
Wrong type of fuel
•
Ignition timing too advanced
•
Excessive carbon deposited in combustion chamber
Summary of Contents for 1500
