PAGE 28
SERVICE MANUAL
Maintenance
• Shift gear selector lever on dash board to reverse
position as shown in picture.
• Manually push gear selector lever on engine to reverse
(aft most position) as shown in picture.
*if vehicle is between gears you may have to rock the vehicle back
and forth to engage the gears.
• When the engine’s reverse gear is engaged, the reverse
indicator light on the dash panel will illuminate.
• Tighten rear shift bracket nut snugly against shift cable
bracket while ensuring the engine shift lever is still in the
reverse position.
• Tighten front shift cable bracket nut snugly against shift
cable bracket. While doing this make sure the shift light
is still illuminated.
• When all nuts are fully tightened, check that the shift
position indicator lights illuminate in their respected
positions. If the lights remain illuminated while between
gear positions, the linkage was not properly adjusted.
Summary of Contents for 1500
