Page 5 - 7
MAINTENANCE
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
5
Front
Adjust both tie rods equally to obtain the correct toe-out. Hold
tie rod (2) with an open end wrench, loosen the jam nut (1)
and turn the adjustment shaft (3) to move the wheel in the
desired direction.
Recheck the measurement at the front and at the rear of the
front tires, if the 1/4” toe-out has been achieved tighten the
lock nut (1) on each tie rod.
Rear
The rear tie rods have jam nuts (4) at each end, one end has
the standard right hand threads and the other end has left
hand threads.
Loosen the jam nuts (4) on both tie rods, turn the center tube
(5) with an open end wrench to adjust the length of each tie
rod equally.
Recheck the measurement at the front and at the rear of the
rear tires, if the 1/4” toe-out has been achieved tighten the
lock nuts (4) on each tie rod.
1
3
2
4
5
4
