56
21
Shock absorber
assemblies
Check operation and correct if necessary
Check for oil leakage and replace if
necessary
I
I
22
Rear knuckle
pivots
Lubricate with grease
L
L
23 Steering shaft
Lubricate with grease
L
L
24
Steering
system
Check operation and repair or replace if
damaged
Check toe-in and adjust if necessary
I
I
I
I
25 Engine mount
Check for the cracks or other damage and
replace if necessary
I
I
26
Transmission
boots
Check for the cracks or other damage and
replace if necessary
I
I
I
I
L
: Lubricate
C
: Clean
R
: Replace
T
: Tighten
I
: Inspection, cleaning and adjustment
Have your ATV serviced and checked by an authorized dealer. Ensure the service book is stamped
and signed. Failure to do so could invalidate your warranty.
The maintenance schedule is based on months of use or kilometers traveled. Do the scheduled
maintenance based on which ever comes first.
CAUTION!
Some maintenance items need more frequent service if you are riding in unusually wet,
sandy or muddy areas or at full throttle.
Hydraulic brake service
Regularly check and if necessary correct the brake fluid level.
Every two years replace the internal components of the brake master cylinder and
calipers and change the brake fluid.
Replace the brake hoses every four years and if cracked or damaged.
Remove the carbon deposits in cylinder head, piston and exhaust system when power is
obviously lower than normal.
Perform maintenance and check when continuous abnormal misfire, after-urn and
overheating occur.
