Charging and Charge Management
Charging your Bad Elf Flex Mini
Charge your Bad Elf Flex Mini fully before first use. Any standard USB compatible charging
source can be used to charge your Bad Elf Flex Mini, including a PC or laptop.
● Connect the supplied USB-C charging cable into your Bad Elf Flex Mini.
● Insert the other end of the charging cable into any USB charging source.
● Charge your Bad Elf Flex Mini until the LCD screen indicates the unit is fully charged.
● The Flex Mini uses variable rate charging depending on the internal battery state and
external charging source, but should always be fully charged within 4hrs.
Operation while charging
You can operate your Bad Elf Flex Mini while it is charging. A charge current of 500mA or
greater can sustain unlimited operation regardless of the charge state.
Temperature limitations
To protect the internal battery, charging only occurs within the valid temperature range defined in
the specifications of this manual.
Note: The battery temperature may differ from the ambient air temperature as internal
temperatures vary during usage.
Low battery
The Bad Elf Flex Mini actively monitors the charge level of the internal battery. As the battery’s
charge approaches a low point, the LCD screen will display a warning and may automatically
shut down to avoid over-discharge of the battery. Normal operation will resume when the Flex
Mini is connected to a USB power source.
Battery Safety
Charge and use the rechargeable Lithium-ion battery only in strict accordance with the
instructions. Charging or using the battery in unauthorized equipment can cause an explosion or
fire, and can result in personal injury and/or equipment damage. To prevent injury or damage:
● Do not charge or use the product if it appears to be damaged or leaking.
● Charge the product only with an approved USB power source that can provide at least
500mA of charging current at 5VDC.
Copyright © 2023. Bad Elf, LLC.
4
All Rights Reserved.