2.0/0908/TG
Page 3 of 6
PARTS INCLUDED:
(A)
16 - Black Pegs* (one shown)
(B)
2 - Top Rails
(C1) 2 - Top Shelf Rails**
(C2) 4 - Middle/Lower Shelf Rails
(D)
2 - End Panels
(E)
16 - 1¾” Bolts (one shown)
(F1) 1 - Top Shelf Panel** (not shown)
(F2) 2 - Middle/Lower Shelf Panels
(not shown)
(G)
1 - Safety Belt
(H)
1 - Metal Support Bar
(I)
2 - 5/8” Screws (one shown)
(J)
1 - Mattress Pad (not shown)
TOOLS NEEDED:
Phillips Screwdriver
(not included)
Power driver is helpful but be careful not to damage the product.
PARTS AND HARDWARE:
ASSEMBLY NOTES:
Parts & Hardware diagrams not to scale.
* Style of PEGS may vary from shown
** The two TOP SHELF RAILS have a larger
shelf groove than the other four rails. The
TOP SHELF PANEL is thicker than the
other two shelf panels.
The table can be assembled by
one person. Having a second
person available to help can
speed things along.
Don’t fully tighten the bolts
until the table is completely
assembled. Then go back and
tighten them securely, but don’t
overtighten.
E
A
I
H
C1,C2
B
B
D
D
G
