PICTURE 4A - Wood Support Bar, Metal Sup-
port Rail, and Plastic Leg properly positioned.
PICTURE 4A - With a 2” Hex Head Screw,
secure the Wood Support Bar, Metal Support
Rail, and Plastic Leg together. For illustration
purposes the screw is not fully inserted in the
picture above. Be sure that you screw
it in completely.
PICTURE 5 - 1/2” Hex Head Bolt inserted
through Metal Support Rail and Plastic Leg.
Secured with an Acorn Nut.
When fully assembled, the bassinet stand should look
like the picture at left and the bassinet should look
like the picture above.
Page 4 of 4 1.1/0604
