1.0/0416/HF
(A) 1 - Metal Chassis
(B) 2 - Large Wheel
(C) 2 - Small Wheel
(D) 1 - Pram Body
(E) 1 - Handle
(F) 1 SET - Hardware Kit (4xBolt, 4xSpacer, 4xCap Nut, Allen Wrench, Cap Wrench)
(G) 1 SET - Fabric Bedding (1xPadded Mat, 1xPillow, 1xBoot)
PARTS AND HARDWARE INCLUDED:
STEP 1: REVIEW THE FINAL ASSEMBLY DIAGRAM ON THE
LAST PAGE OF THIS MANUAL FOR AN ASSEMBLY OVERVIEW.
Attach the SMALL WHEELS (C) to the
shorter wheel posts
on the
METAL CHASSIS (A). Attach the LARGE WHEELS (B) to the
longer
wheel posts
on the METAL CHASSIS (A). Push the metal bracket at the
center of the wheel inward to open it (PHOTOS 1 and 2), slide the wheel
onto the end of the post, and release the bracket. The bracket locks over
the tip of the rod, and if you tug on the wheel it should not come off.
STEP 2:
Attach the PRAM BODY (D) to the METAL CHASSIS (A). Line up the four hinges on
the CHASSIS with the four brackets on the BODY, and snap them in (PHOTOS 3 and 4). The
canopy end
of the BODY (D) attaches on the SMALL WHEEL (C) side of the CHASSIS (A).
PHOTO 3 - Line up the Hinge
PHOTO 4 - Snap into place
D
A
D
A
< PHOTO 1
Metal Bracket
closed
PHOTO 2 >
Metal Bracket
pushed open
