SCOPE OF MANUAL
This manual contains information concerning the
installation, operation and maintenance of the Model
2100R+ flow meter. To ensure proper performance of the
meter, the instructions given in this manual should be
thoroughly understood and followed.
Keep the manual in a readily accessible location for
future reference.
Changes and additions to the original edition of this
manual will be covered by a "CHANGE NOTICE"
supplied with the manual. The change notice will explain
any differences between the product described in this
manual.
Model 2100R+
TABLE OF CONTENTS
Page
Page
Unpacking and Inspection.................................
1-1
OPERATION
General
Specifications ...................................... 1-2
Recorder Status and Calibration Modes............
3-1
INSTALLATION PROCEDURE
Recorder Options and Error Screens.................
3-7
Enclosure Mounting .......................................
2-1
Flow Meter Status and Calibration Modes........
3-8
Wiring
Connections .......................................... 2-2
Flow Meter Option Screens .............................. 3-15
Sensor Mounting...............................................
2-4
Chart Pen Zero & Span Adjustment ................. 3-16
Sensor Cable Connection .................................. 2-10 Hexadecimal
Conversions.................................
3-19
Chart Installation and Pen Alignment ............... 2-12
Illustrated Parts List .......................................... 3-21
To avoid damage in transit, Badger products are
shipped to the customer in special shipping containers.
Upon receipt of the product, perform the following
unpacking and inspection procedures:
NOTE: If damage to the shipping container is
evident upon receipt, request the carrier to be present
when the product is unpacked.
a.
Carefully open the shipping container following
any instructions that may be marked on the box. Remove
all cushioning material surrounding the product and
carefully lift the product from the container.
UNPACKING &
INSPECTION
Retain the container and all packing material for
possible use in reshipment or storage.
b. Visually inspect the product and applicable
accessories for any physical damage such as scratches,
loose or broken parts, or any other sign of damage that
may have occurred during shipment.
NOTE: If damage is found, request an inspection by
the carrier's agent within 48 hours of delivery and file
a claim with the carrier. A claim for equipment
damage in transit is the sole responsibility of the
customer.
941181
03/96
1-1
