ABOUT THE E-SERIES ULTRASONIC METER
The Badger Meter E-Series Ultrasonic meter is an electronic meter using ultrasonic technology and solid-state electronics
contained in a compact, totally encapsulated, weatherproof and UV-resistant housing for residential and commercial
applications The ultrasonic measurement system has no moving parts, provides long-term accuracy and eliminates
measurement errors due to sand, suspended particles, air pockets and pressure fluctuations
The Ultrasonic meter is permanently sealed to eliminate the intrusion of moisture, dirt or other contaminants and is suitable
for installation in all environments, including meter pits subject to continuous submergence
The meter can be installed using horizontal or vertical piping, with water flow in the up direction The meter will not measure
flow when an “empty pipe” condition is experienced An empty pipe is defined as a condition when the flow sensors are not
fully submerged
SAFETY INFORMATION
The installation of the E-Series Ultrasonic meter must comply with all applicable federal, state, and local rules, regulations,
and codes
Failure to read and follow these instructions can lead to misapplication or misuse of the E-Series Ultrasonic meter, resulting in
personal injury and damage to equipment
PRODUCT UNPACKING AND INSPECTION
Upon opening the shipping container, visually inspect the product and applicable accessories for any physical damage such
as scratches, loose or broken parts, or any other sign of damage that may have occurred during shipment
NOTE:
N
If damage is found, request an inspection by the carrier’s agent within 48 hours of delivery and file a claim with the
carrier A claim for equipment damage in transit is the sole responsibility of the purchaser
REQUIREMENTS
MPORTANT
I
For proper handling of the higher reading resolution and the extended status indicator capabilities of the HR-E-Series Ultrasonic
meter, the following software versions are required for your reading system:
Reading Data Management Software
• ReadCenter Data: Version 1.11.12.27 or higher (does not include extended status indicator capabilities)
• ReadCenter Analytics and ReadCenter Analytics Mobile: Version 2.12.7.6 or later
• ReadCenter Analytics Pro and ReadCenter An: Version 1.0.0 or later
Mobile Reading Systems
• ORS: Version 2.2.1 or later
Handheld Reading Systems
• Badger Field Application Suite: Version 2.2.3 or later
• ORION Field Application route reading software: Version 2.2.3 or later
• ORION Endpoint Utility programming & quick read software: Version 2.2.2 or later
For assistance, please contact Badger Meter Technical Support at 1-800-876-3837 or the appropriate endpoint provider.
About the e-series ultrasonic meter
Page 5
September 2017
ESM-UM-00255-EN-01
