Introduction
Seite 2
December 2019
AC_F001_IA_02_2243
RoHs
Our products are RoHs compliant.
Battery disposal
The batteries contained in our products need to be disposed of as per your local legislation acc. to EU directive
2006/66/EG.
2. INTRODUCTION
2.1. Purpose of the document
The purpose of this Installation guide is to give a general guide to the safety regulations, the storage and transport
requirements and the installation instructions of the F001.
2.2. Use of the F001
2.2.1. INTENDED USE
The F001 is intended for use in safe areas (ordinary locations).
The F001 is designed and constructed for measurement purposes in industrial processes to show the flow rate, the total and
the accumulated total of a meidum that passes a sensor. For details, refer to the chapter:
Technical specifications
.
2.2.2. UNINTENDED USE
A hazardous situation may occur if the F001 is not used for purpose it was designed for or is used incorrectly. Please obey the
information as given in this instruction manual:
•
Do not use the standard configuration (safe area / ordinary location applications) in an hazardous area.
•
Do not use the F001 in life support applications. A possible malfunction of the F001 can cause (serious) injury or death to
persons.
2.3. Target audience
This installation guide is aimed at the persons who are:
•
involved in the preparation of the required work;
•
involved in the installation, and the commissioning work;
•
appointed to supervise the required work;
•
appointed for the certification, the occupational, the health, the safety and the quality related tasks.
