15
LED Indicator
The LED indicator shows the radio’s status.
Red Light: The radio is transmitting.
Green Light: The radio is powering on, receiving a non-encrypted call or message, or
detecting signal activity.
Alert Tones
Alert tones are for indicating radio status or recieving signal.
Continuous tone: Sounds until user silences it.
Recurring tone: Programmed for desired duration and repetition. Automatic On/Stop/Repeat.
Repeating tone: Repeats until user silences it.
Single tone: Sounds once, duration set with programming software.
PTT
1. The PTT button enables the radio to transmit information to other radios.
Press PTT to communicate, release to receive. Pressing PTT activates the microphone
on the radio or speaker mic(if attached).
2. When the radio is not receiving communication, the PTT button can be used to initiate
a new call. If programmed, the Talk Permit tone will sound, wait until tone ends before
talking.
14
RX
Release PTT to receive information. Adjust volume level for best voice quality.
TX
Press PTT and face microphone when talking. Hold the radio 1.5” to 2” away from your
mouth and speak normally for best results.
Functions