BaehrTec A2000 operating instructions
Page 14/58
English – V101 - effective 10/13
Please ensure that the BaehrTec A2000 and the instruments are always in an
immaculate hygienic condition, in order that they do put your own health or that of others
at risk. Find out more in the section
“Care (disinfection)”
of the BaehrTec A2000.
Rings or jewellery worn while working with the device may cause scratches on the
handpiece. Such damage is excluded from the guarantee. Whilst working with the device,
you should avoid wearing jewellery.
Please only work with the suction turned on in order to suction off any pathogen-
containing dust and to prevent the handpiece motor or the handpiece from becoming
warm.
Never submerge the device in liquids, and do not suck up any liquids.
If you suck up any cotton wool, paper or the like, this may cause the suction
openings in the handpiece to become blocked. This may heavily affect the suction
power.
If the symbol for a filter change appears
on the display, it is essential that
you change the dust bag (the display can only function reliably if all filters are correctly
applied. Therefore, only work with the device if all filters are applied). If you do not do
this, the device will switch automatically after approximately half a minute to suction
level 3 to prevent any damage to your device (please refer to the section
“Filter change”
for more information on how to change the dust bag and the filter).
Never work with the device if the dust bag or the filter are not inserted, as in such cases,
the device may be damaged and the guarantee shall expire.
