BaehrTec A2000 operating instructions
English – V101 - effective10/13
Page 5/58
On the basis of the risk assessment already implemented we have noticed that
(electro) magnetic fields can lead to interference. Please therefore switch off all
devices and equipment (mobile phones, Wi-Fi etc.) that create or are able to create
such fields while using the device. Alternatively, the distance between the A2000
and these devices must be at least 50 cm in order to be able to exclude any
functional interference.
Please do not use the device in the following cases, and contact the manufacturer:
If the power cable / insulation shows signs of damage.
If the device was exposed to moisture and / or wetness.
If the device has been dropped and / or if the device housing is
damaged.
In the event of lighting strike and / or overvoltage, the device may be damaged. For this
reason, we also recommend installing overvoltage protection and removing the plug
during a storm and / or after a long period of non-use in order to protect the device from
voltage peaks.
Please note the customary specifications for the power supply before connecting the
device to the mains.
2.1 Symbols
2.1.1
2.1.1 Symbols in these operating instructions
Warning!
This symbol indicates a danger to humans or the device. This symbol must always be
given the utmost attention. Read the corresponding sections especially carefully and
adhere very strictly to the specifications.
This symbol provides especially useful advice and gives additional information on
operating the device.
CE sign (Communauté Européenne) with the number of the certification authority. A
product bearing this label fulfils the requirements of the corresponding EU guideline (the
applicable European Standard).
