8 |
36
W. Baelz & Sohn GmbH & Co.
· Koepffstrasse 5 · 74076 Heilbronn · Germany ·
www.baelz.de Seite | Page
Motorized Linear Actuator
baelz 373-E45
4. ASSEMBLY
Make sure that the specifications on the nameplate correspond to those in
the order documents!
4.1 Fitting position
When fitting with the connecting rod in horizontal position, fit the linear actuator such that the
sides of the yoke are positioned one above the other in the vertical plane.
Risk of damage if no valve is fitted to actuator!
Caution
Caution:
● If the linear actuator is operated without a valve, the missing stop may cause damage
to the actuator. The actuator must therefore
never be operated without a valve
.
● Allow for about 200 mm space above the cover at the site of installation.
● Check the work environment before fitting the actuator and putting it into operation:
● Make sure that the valve is correctly installed. For detailed information, refer to the
valve's installation instructions.
● Determine the mounting position of the linear actuator. Do not mount linear actuators
"head down" below the valve.
Attention
Fig. 2: Fitting position
Summary of Contents for BA 373-E45
Page 36: ......