17
Wiring Installation
The wiring now has to be connected up so
that everything has power and can function
correctly.
All the wires are color coded so it is simply a
matter of connecting the same colored wire
ends together.
1. The first wire to connect is the main wire
connecting from the controller to the
battery. This wire has two pins at the end as
shown in the first photo. At the end of the
wires are arrows, align the arrows and then
insert the pins.
2. Then wire the pedal assist sensor to the
motor. This wire as shown in photos 2 has a
plastic cap that threads on after inserting
the wires, to ensure a tight connection.
3
. Now connect the Wiring Loom to the
motor. These wires are colour coded with a
black end plug shown in photos
3
on this
page.
4. Connect the throttle.
5. The green plug from the wiring loom joins
with the wire coming from the Display monitor.
6. Lastly, the two left over yellow plugs will
connect to the electric brake levers.
