33
Continued on page 34
B
022
10 lb bag
B
025
16 lb bag
B
026
20 lb bag
(1) Look at the Bottom of this sheet and select the product you wish to change.
(2) Press ESC , Use the up or down arrow to move the selection to
Highlight Parameters. Press OK
(3) If the 3 Digits after FDB are not highlighted , Use the up or down arrow to
move the selection to
Macro 000 FDB
XXX
(
041
example) . If it is not
highlighted , then press OK again. Once you are at the chosen number
then press OK to cause the FDB number to Highlight.
B
249
B Level Summer
Time
ON/OFF
B
173
A Level
Time
ON/OFF sets.
00
On Time
01
02
B
236
Summer ON/OFF
Dates
00
Is the Date that the B level is
turned on
B
041
1gal water or 1 liter
B
042
2.5 ,3 gal or 5 liter
B
043
5 Gal or 10 liter
ICE
WATER
(Ice lb. are based on seconds)
(Water gal. are based on seconds)
(Time is based on a 24hour clock)
(Factory settings)
(Factory settings)
(7 sec.)
(9 sec.)
(11 sec.)
(38 sec.)
(96 sec.)
(190 sec.)
Macro 000 FDB
022
PRESET COUNTER
counting setpoint
000007
PRESET COUNTER
counting setpoint
000038
Macro 000 FDB
249
TIME PROG WEEKLY
n.00 04:00 on
STOP
PARAMETERS
MISCELLANEOUS
D:MTWTFSS W:12345
Macro 000 FDB
249
TIME PROG WEEKLY
n.00 04:00 on
D:MTWTFSS W:12345
Macro 000 FDB
236
TIME PROG YEARLY
n.00 04:00 on
15 MARCH
Macro 000 FDB
041
(4) Press the + or the –
n.00
OK
change OK Press the + or the –
to time or date.
(5) Press OK . Press the + or the – key
to raise or lower your time and or date.
press OK to lock in each setting .
(4) Press the + or the – key to the
number below Counting Setpoint .
000000
You can highlight Set Time
(5) Press OK . Press the + or the –
key to raise or lower your value. When
you are done Press OK to lock in the
setting .
The 4 keys to the right
are located on the
front of the PLC and
will be the only keys
needed for this part of
the PLC programming
PLC
Changing Parameters
ESC
OK
A
B
