34
Pressing A and + buttons at the same time will cycle the Beater bar forwar
and reverse for as long as the buttons are pressed.
A Level for 24 hours
A
and
B
Pressing A and B buttons at the same time will allow the ice maker to fill
the Ice Storage bin to the A Level and then fluctuate between the A & B Level for
24 hours. Once the ice falls below the B Level, the ice maker will fill back up to
the A Level until Escape is pressed or until 24 hours from the time the button
was first pressed has expired.
Pressing B and + buttons at the same time will cause Upper Augers to
rotate as long as the buttons are pressed.
A Level One Time – and +
Pressing - and + buttons at the same time will allow the ice maker to fill
the Ice Storage bin to the A Level then revert back to the normal operating level
you are programed for.
B
149
Customer Delay
B
228
“Out of Ice” Ice Maker
run Time
(Timers are based on seconds)
(Factory settings)
(93 sec.)
(10800 sec.)
B and A on
+ and Minus on
Macro 000 FDB
228
Macro 000 FDB
149
TIMER A/C
on delay
000093
TIMER A/C
on delay
10800
(4) Press the + or the – key to the
number below Timer.
000000
You can highlight Set Time.
(5) Press OK . Press the + or the –
key to raise or lower your time. OK
to lock in the setting .
(6) Press esc when you have finished.
Beater Bar
Upper Augers
Caution!
The A level is to be utilized only when you are
certain that the ice within the A level will be sold within
approximately 2.5 hours. The A level should not be used
for storage purposes.
A Level from 7am to 10pm B and -
Pressing B and - buttons at the same time will allow the ice maker to fill
the Ice Storage bin to the A level and maintain if possible from 7 AM to 10 PM.
B and - on
Additional Ice Production
XL1900 & XL1900plus Models Only
(To Change the
B
173
A level ON and OFF times see page)
Ice Circulation
(use only when advised)
Pressing the ESC button will cancel all Additional Ice Production and return your vending machine
back to it’s scheduled program.
