Bahco H9-220, Operating Manual / Spare Parts List

TECHNICAL DATA

2

Tool Specifi cations

Cutting force   

5.0 kN (6 bar/90 Psi)

Stroke maximum 

6.5 mm

Required free air 

0.5 l/cycle

Weight  

1.0 

kg

Working pressure 

5 - 7 bar (75 - 100 lbf/in²)

Cutting time   

< 75 dB (A)

Noise level 

< 2.5 m/s²

    Safety Rules

1  Do not use the tool outside the design intent.

2  Always disconnect the airline from the tool inlet before any service or adjustments.

3 Keep 

fi ngers and hands away from the working area when operating the tool.

4  The operating air pressure may not exceed 7 bar / 100 Psi.

5  When using the tool, the wearing of safety glasses is required both by the operator  

and others neaarby the tool. We recommend the operator to wear gloves.

6  Always adopt a fi rm footing before operating the tool.

7  The precautions to be observed when using this tool shall be explained by the  

customer to all operators.

8  The tool shall be maintained in a safe working condition and examined regulary by  

trained and competent personnel.

9  Use only parts with this tool, which are recommended an supplied by BAHCO.

10 Any modifi cation undertaken by the customer to the tool, shall be the customers  

 entire 

responsibility.

Intesension of use

This tool is designed to punch holes in sheet metal.