INSTRUCTION MANUAL
3
CONNECTION TO THE AIR SUPPLY
We recommend the use of pressure regulators and oiling/ fi lter systems on the main
air supply (see diagram below). All air hoses must have a minimum inner diameter of
6 mm or 1/4 inch. The tool is operated at an optimum pressure of 6 bar or 90 Psi.
TECHNICAL DESCRIPTION
TA10 is a hydro-pneumatic tool. Its consist of a power unit and a tool head. The
hydropnumatic power unit has an air cylinder connected to a hydraulic cylinder. This
gives a booster effect.
An input of 6 bar/90 Psi air pressure, gives a oil pressure of 177 bar/2655 Psi. The oil
pressure gives the Hydraulic Piston a force of 10 kN and in this tool a stroke
of 6.5 mm/ 0.26 inch. It is a one-way Air Piston with spring return.
The tool is supplied with a Safety Lever
(15)
, which makes it impossible to accidentally
active the tool.
By unscrewing the screws
(33)
, the handle can be adjusted to the most comfortable
working position.
TA10D-327
Lubrication
Pressure gulator
and filter
Summary of Contents for TA10-D327
Page 7: ...INSTRUCTION MANUAL 7...
