Air suction device
–
User manual
Page 18
of 28
UMN Air 10/2019
9.8.1. My devices
The menu item My Devices lists all devices that have been previously connected to the app at least once. It is not
possible to change to listed devices in this menu item.
If you want to remove a device from the list, tap on the desired item in the list and confirm you would like to remove
the entry by clicking OK. The selected device will then be deleted from the app.
If you have removed the wrong device from the list, you will need to conduct a new search to find and reconnect
that device.
9.8.2. Automatic connection estabishment
In the menu item "My devices" it is possible to establish an automatic connection to al Device.
Automatic connection establishment is activated the first time the app connects to a foot care device.
When the automatic connection establishment is activated, the app searches for the selected foot care device and
connects to it alone. This behavior occurs when the app is started and when the connection to the AIR is lost.
If the existing wireless connection to the pedicure device was intentionally terminated via the "wireless connection
symbol" or via the floor navigation bar, the automatic connection establishment is interrupted once.
A red dot and the text "Automatic connection establishment activated"
under the respective device name indicate that the automatic connection
establishment is activated.
A gray dot indicates that automatic connection setup is deactivated.
To deactivate the automatic connection establishment, simply press the
red dot.
To activate the automatic connection establishment, please make sure that
no automatic connection establishment is active. Then press the point on
the device at which you want to activate the automatic connection.
9.8.3. Tutorials
Under the menu item Tutorials you will find a list of instructions for different languages. They include a quick guide
and a detailed guide for each language. The tutorials are provided in the languages that the app supports.
The following languages are currently supported:
German
English
No separate app is required to open the quick guide. It will open in the app. You can exit the screen of the respective
tutorial via the back arrow in the lower right corner of the app or via the back arrow in the upper left corner.
You can also download and print the tutorials at
9.8.4. Light Settings
This menu item allows you to change the default brightness setting of the hand piece light as desired. After changing
the setting, your preferred brightness level will be saved and used in the app from this point on.
9.8.5. Handpiece settings
In order for every handpiece on the b-on-foot AIR to function properly, it is necessary to learn it.
Each b-on-foot AIR goes through the process of teaching the handpiece before delivery and is therefore ready for
use immediately after delivery. However, if over time you have the feeling that the handpiece motor behaves
differently than after purchase or you want to connect a new handpiece to your b-on-foot Air, you can have the
motor relearned using this menu item.
