Air suction device
–
User manual
Page 6
of 28
UMN Air 10/2019
4. Applications
The Air suction device is designed for cosmetic foot care, pedicures and manicures. Attachments such as files,
drills and grinding bits can be fitted onto the rotating motor hand piece. These interchangeable bits are ideal for
quickly and effectively removing calluses, corns, nails, etc. They can also be used to grind, clean and polish nails.
The device is intended for commercial use only.
5. Operator requirements
The Air suction device should only be operated by a trained chiropodist, podiatrist, beautician or nail designer who
is familiar with the relevant cosmetic procedures and has the necessary training.
6. Personnel and client protection
The device may only be opened by the manufacturer or by an authorised expert assigned by it. Unauthorised
modifications to the device are not permitted.
The device should only be operated in a safe environment.
The device must only be used for its intended purpose.
Keep the device away from other electrical equipment.
Moisture can cause electric shock.
After each use and before commencing treatment on the next client, the interchangeable bits must be disinfected,
cleaned and sterilised in acc
ordance with the manufacturer’s instruction
s. This prevents the potential transmission
of germs to subsequent clients.
All surfaces of the motor hand piece must also be disinfected after each use and before commencing treatment on
the next client.
The operator is required to wear protective gloves, goggles and mouth and nose mask when using the device.
Only use interchangeable bits approved by the manufacturer for the maximum speed of the hand piece.
Make sure that no hair can get caught in the rotating parts (nail drills, etc.) while working with the device. If
necessary, wear a hairnet.
7. Safety
Make sure your power supply matches the rated voltage indicated on the foot care device. The electrical mains
must have an effective earth connection and the installation must comply with all relevant regulations.
Warning
: To avoid the risk of electric shock, this device may only be connected to a mains socket outlet with a
protective earthing connection.
Only use smoothly running, undamaged rotating bits. This will avoid damage to the hand piece.
Only use rustproof bits when working with the motor suction hand piece.
Always disconnect the device from the mains before beginning any maintenance.
It should be noted that the use of electrical accessories (e.g. lights), motors and cables (e.g. motor cables) other
than those provided by the manufacturer, as well as the use of other electrical equipment close to the device, may
result in increased emitted interference or reduced immunity to interference of the device.
Please observe any additional safety instructions outlined in other sections of this manual.
