Air suction device
–
User manual
Page 20
of 28
UMN Air 10/2019
Do not clean sharp-edged objects.
Attach the new dust bag to the cable suction tube.
Please make sure that you press the dust bag on the black plastic ring and this
then noticeably engages on the cable suction tube.
Now insert the new dust bag into the device. After that, the lid is first hung down and
last locked in the top with the spring in the device.
The device must never be operated without a dustbag! The dust bag is a disposable dust bag and must not be
reused after removing it from the dust box lid!
Please remember to remove the dust bag from the device before shipping the device.
Due to hygienic measures, the used dust bags are removed and disposed of during service.
9.10. Changing the rotating bit
The suction hand piece is designed with an opening for vacuuming grinding dust.
The motor must be switched off when replacing rotating bits.
Insert the shaft of the desired bit into the head of the hand piece as far as it will go.
The shaft of the inserted bit is automatically clamped when the motor is switched on.
Only use nail drill bits with a shaft diameter of 2.35 mm (+0 to - 0.016 mm) (HP shaft).
10. Maintenance and disinfection
Below you can find details of the various maintenance and disinfection measures to be carried out at regular
intervals.
Proof of such sanitary activities may be required by the relevant inspection authorities (e.g. health and safety
inspectors)
Tip:
Create a schedule for maintenance and disinfection. Enter these dates in your studio calendar or keep a
maintenance record in which the dates are listed and the completion of the relevant health and safety checks are
confirmed by you.
10.1.
Cleaning and disinfection
The best way to clean the plastic housing, the front panel of the device and the motor hand piece including the hose
is with a damp cloth with anti-bacterial properties (e.g. Mikrobac Tissues)
For disinfection, please use a surface disinfectant such as Mikrobac Forte or Bacillol AF. Moisten a cloth with
disinfectant and use it to wipe down the device, the smartphone and the hand piece, including the hose.
Never spray disinfectants directly onto the device or any of its parts!
The use of disinfectants may cause slight fading or matting of the surfaces. This will not affect the functioning or
safety of the device
Always avoid aggressive solvents as well as acids and alkalis
.
Recommended disinfection routine:
After every treatment:
-
Wipe the hand piece, hose and smartphone of the device and all parts that were touched during
treatment with a disposable disinfectant tissue.
