Aurora243 Outdoor 2x10W TDD gNodeB Installation Guide
20
3.3.2 Install on Wall
Ensure the wall can bear at least four times the weight of the gNB. The wall mounting bracket is shown in
Figure 3-11.
Figure 3-11: Wall Mounting Bracket
Follow the steps below to install the gNB on a wall.
1.
Place the mounting bracket on the wall with arrow point up and mark the drilling location using a
pencil or marker (Figure 3-12).
Figure 3-12: Mark Drilling Location
2.
Drill two 0.4 in. (10 mm) diameter by 2.8 in. (70 mm) deep holes in the wall at the marked locations
and insert expansion bolts.
Figure 3-13: Install Expansion Bolts
