Aurora243 Outdoor 2x10W TDD gNodeB Installation Guide
17
3.3 Install gNB on Pole or Wall
Use the following procedures to install the Aurora243 on a pole or attach to a wall.
3.3.1 Install on Pole
Ensure the pole's diameter is in the range of 1.6 in–3.9 in (40 mm–100 mm), as shown in
Figure 3-4. The position of the gNB on the pole should be at least 47 inches (120 cm) in height.
Figure 3-4: Diameter and Height Requirements
The gNB mounting bracket is assembled before packing and includes two components: the pre-assembled
bracket on the back of the device (Figure 3-5) and the pole or wall mounting bracket (Figure 3-6).
Figure 3-5: Device with Pre-assembled Mounting Bracket
