13
*NOTE: Some users may want to add a GPS antenna to better ensure accurate
physical location information used by the eNB during transmissions. Follow the GPS
vendor’s installation requirements to install a GPS antenna with the Neutrino eNB.
Table 2-3: LED Color States
Color
Status
Description
White
Steady on
The device is powered on.
Slow flash
The device is ready to transmit/receive data.
Fast flash
The device is transmitting data.
Red
Steady on
Alarm indicating strong interference may be
affecting network performance
Slow flash
Other types of alarms are occurring
Fast flash
S1 alarm – the device cannot reach the backhaul
network (Internet)
Please refer to
Appendix A
for all of the Neutrino technical specifications.
Summary of Contents for Neutrino-224
Page 1: ...Neutrino 224 Indoor 2x125mW FDD TDD eNodeB Installation Guide December 2018 Version 1 7...
Page 20: ...20 Figure 4 7 FDD eNB GUI Home Page Figure 4 8 TDD eNB GUI Home Page...
Page 47: ...47 Figure 5 24 LTE Neigh Freq Settings 1 of 2 Figure 5 25 LTE Neigh Freq Settings 2 of 2...
Page 64: ...64 Figure 5 38 Cell ReSelection Parameter Figure 5 39 Additional Measurement Parameter...