71
Table 5-26: Cfsb Select
Parameter Name
Description
Csfb Select GSM
The target selection rule for GSM
Options:
•
0 = Make use of the built-in default cell [Single
Database Assisted Handover (DAHO) cell]
•
1 = Based on the measurement results
Csfb Select WCDMA
The target selection rule for WCDMA
Options:
•
0 = Make use of the built-in default cell (Single DAHO
cell)
•
1 = Based on the measurement results
Csfb Select CDMA2000 The target selection rule for CDMA2000
Options:
•
0 = Make use of the built-in default cell (Single DAHO
cell)
•
1 = Based on the measurement results
5.5.1.7.8
RAT Handover Priority
Refer to Table 5-27 for a description of the
RAT Handover Priority
fields.
Table 5-27: RAT Handover Priority
Parameter Name
Description
eutranPriorityOrder
LTE mode priority.
Options: 0-3
utranPriorityOrder
UTRAN mode priority.
Options: 0-3
geranPriorityOrder
GSM mode priority.
Options: 0-3
cdmaPriorityOrder
CDMA mode priority.
Options: 0-3
5.5.2
Other LTE Settings
5.5.2.1
MOCN Parameters
This menu is used when the core EPC is used by multiple operators. The acronym stands
for Multi-Operator Core Network (MOCN). Refer to Figures 5-43 and 5-44, and to Table 5-
28 for a description of the
MOCN Parameters
. Click on the
+
Add icon in the upper side
side of the window to add the parameters. Select
Save
to retain the configuration.
Summary of Contents for Neutrino-224
Page 1: ...Neutrino 224 Indoor 2x125mW FDD TDD eNodeB Installation Guide December 2018 Version 1 7...
Page 20: ...20 Figure 4 7 FDD eNB GUI Home Page Figure 4 8 TDD eNB GUI Home Page...
Page 47: ...47 Figure 5 24 LTE Neigh Freq Settings 1 of 2 Figure 5 25 LTE Neigh Freq Settings 2 of 2...
Page 64: ...64 Figure 5 38 Cell ReSelection Parameter Figure 5 39 Additional Measurement Parameter...
