Baileigh Industrial 1002692, Operator'S Manual

11 

11 

INSTALLATION 

IMPORTANT: 

Consider the following when looking for a suitable location to place the machine: 

•

  Overall weight of the machine. 

•

  Weight of material being processed. 

•

  Sizes of material to be processed through the machine.

•

  Space needed for auxiliary stands, work tables, or other machinery.

•

  Clearance from walls and other obstacles.

•

  Maintain an adequate working area around the machine for safety. 

•

  Have the work area well illuminated with proper lighting. 

•

  Keep the floor free of oil and make sure it is not slippery. 

•

  Remove scrap and waste materials regularly, and make sure the work area is free from 

obstructing objects. 

•

  It is important to maintain free area around the machine, which is required for the working 

place. If any long material is machined, it is necessary to have a sufficient room in front of 
the machine as well behind it in the places of material input and output. 

•

LEVELING:

 The machine should be sited on a level, concrete floor. Provisions for securing it 

should be in position prior to placing the machine. The accuracy of any machine depends on 
the precise placement of it to the mounting surface. 

•

FLOOR:

 This tool distributes a large amount of weight over a small area. Make certain that 

the floor is capable of supporting the weight of the machine, work stock, and the operator. 
The floor should also be a level surface. If the unit wobbles or rocks once in place, be sure to 
eliminate by using shims. 

•

WORKING CLEARANCES:

 Take into consideration the size of the material to be 

processed. Make sure that you allow enough space for you to operate the machine freely. 

•

POWER SUPPLY PLACEMENT:

 The power supply should be located close enough to the 

machine so that the power cord is not in an area where it would cause a tripping hazard. Be 
sure to observe all electrical codes if installing new circuits and/or outlets.