4
4
SAVE THESE INSTRUCTIONS.
Refer to them often and use them to instruct others.
Crush Hazard
SAFETY PRECAUTIONS
Metal working can be dangerous if safe and proper operating procedures are not followed. As with all machinery,
there are certain hazards involved with the operation of the product. Using the machine with respect and caution
will considerably lessen the possibility of personal injury. However, if normal safety precautions are overlooked or
ignored, personal injury to the operator may result.
Safety equipment such as guards, hold-downs, safety glasses, dust masks and hearing protection can reduce your
potential for injury. But even the best guard won’t make up for poor judgment, carelessness or inattention.
Always
use common sense
and exercise
caution
in the workshop. If a procedure feels dangerous, don’t try it.
REMEMBER:
Your personal safety is your responsibility
.
Dear Valued Customer:
•
All Baileigh machines should be used only for their intended use.
•
Baileigh does not recommend or endorse making any modifications or alterations to a Baileigh machine.
Modifications or alterations to a machine may pose a substantial risk of injury to the operator or others and may
do substantial damage to the machine.
•
Any modifications or alterations to a Baileigh machine will invalidate the machine's warranty.
P
LEASE ENJOY YOUR
B
AILEIGH MACHINE
!
....P
LEASE ENJOY IT
SAFELY!
1.
FOR YOUR OWN SAFETY, READ INSTRUCTION MANUAL BEFORE OPERATING THE
MACHINE.
Learn
the machine’s application and limitations as well as the specific hazards.
2.
Only trained and qualified personnel can operate this machine.
3.
Make sure guards are in place and in proper working order before operating machinery.
4. Understand and obey all safety instructions supplied with drill press, mill, or other machines on which vise is
used.
5. Do not pound or hammer on work- piece. This vise is designed to clamp the workpiece in a desired position for
machining operations only.
6. Bolt or clamp vise to work surface in at least two mounting locations using mounting flanges provided on base.
7. Be sure workpiece is clamped securely between jaws before starting machining operation.
WARNING:
FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL
INJURY