5
5
8. Do not over tighten; vise can develop a large clamping force. Use only force which is needed.
9.
Remove any adjusting tools.
Before operating the machine, make sure any adjusting tools have been
removed.
10.
Keep work area clean.
Cluttered areas invite injuries.
11.
Overloading machine.
By overloading the machine, you may cause injury from flying parts.
DO NOT
exceed
the specified machine capacities.
12.
Do not force tool.
Your machine will do a better and safer job if used as intended.
DO NOT
use inappropriate
attachments in an attempt to exceed the machines rated capacity.
13.
Dress appropriate.
DO NOT
wear loose fitting clothing or jewelry as they can be caught in moving machine
parts. Protective clothing and steel toe shoes are recommended when using machinery. Wear a restrictive hair
covering to contain long hair.
14.
Use eye and ear protection
. Always wear ISO approved impact safety goggles. Wear a full-face shield if you
are producing metal filings.
15.
Do not overreach
. Maintain proper footing and balance at all times.
DO NOT
reach over or across a running
machine.
16.
Stay alert
. Watch what you are doing and use common sense.
DO NOT
operate any tool or machine when you
are tired.
17.
Check for damaged parts
. Before using any tool or machine, carefully check any part that appears damaged.
Check for alignment and binding of moving parts that may affect proper machine operation.
18.
Observe work area conditions
.
DO NOT
use machines or power tools in damp or wet locations. Do not
expose to rain. Keep work area well lighted.
DO NOT
use electrically powered tools in the presence of
flammable gases or liquids.
19.
Keep children away
. Children must never be allowed in the work area.
DO NOT
let them handle machines,
tools, or extension cords.
20.
Store idle equipment
. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up
tools and keep them out of reach of children.
21.
DO NOT operate machine if under the influence of alcohol or drugs
. Read warning labels on prescriptions.
If there is any doubt,
DO NOT
operate the machine.
22.
Turn off
power before checking, cleaning, or replacing any parts.
23. Keep visitors a safe distance from the work area.
Read carefully and follow all safety rules and operating instructions before first use of this
product.
5” Multijaw Bench Vise has a cast iron body and replaceable hardened steel jaws. The vise
features parallel jaws, pipe jaws and V-jaws. Vise will swivel 360° on the base and lock in any
position. The jaws can rotate 360° and lock in any position. Anvil on the body of vise provides a
convenient work surface.
DESCRIPTION
