16
16
Vise
A clamping system that provides the basic support and
grip for the work material. A handwheel opens and
closes the vise jaws.
From the operators position in front of the saw, the left
side of the vise has the jaws to clamp the material.
The right side bar provides support to reduce and
prevent the material from kicking out at the end of the
cut.
Material Stop
The material stop to the right side of the vise may be
used to set the cut length of the material. This is
especially useful for multiple cuts of the same length.
Support Roller
The support roller to the left or infeed side of the vise
will assist in holding the material on plane with the
vise table as well as assist in feeding the material
through the vise.
