21
21
Assemble the coolant tank.
•
Insert the coolant pump (
X
) into the coolant tank (
T
).
•
Using (2) M6 washers and (2) M6x20 bolts, secure pump
to tank.
•
Place the hose clamp (
U
) onto the 0.375” flow tube (
V
)
and connect tube to hose connector. Tighten the hose
clamp.
Install the coolant tank.
•
Place the coolant pump (
X
) towards the rear opening of
the machine stand.
•
Place the coolant tank (
T
) onto the coolant platform (
H
).
The trough of the tank fits over the vertical lip of the
platform.
•
Insert one end of the 0.50” drain hose (
W
) onto the hose
connector (
Z
) on the underside of the machine base.
•
Place the other end into the insert (
Y
) of the coolant tank.
Attach the rear plate to the back of the stand.
•
Place rear plate (
AA
) across the back of the machine stand.
•
Align the plate holes and secure the plate with (4) M8
washers and (4) M8x25 screws.
Install the splash plate.
•
Insert the splash plate (
AB
) onto the front sidewall of
machine base.
•
Align the 2 slots (
AC
) and attach plate with (2) M8
washers and (2) M8x20 hex screws.
•
Adjust the plate to its proper position and tighten bolts.
X
U
V
T
X
W
Y
H
T
Z
AA
W
AB
AC
