19
19
MAINTENANCE
•
Check daily for any unsafe conditions and fix immediately.
•
Check that all nuts and bolts are properly tightened.
•
On a weekly basis clean the machine and the area around it.
•
To keep spindle sander in perfect condition, clean machine and attachments at all times.
•
Clean tapered sleeves and tapered socket before use, this will protect spindle sleeves from
nicks.
•
Bent sleeves are easily straightened by placing them in the tapered socket and slipping a
small pipe over the steel shaft. Using a dial indicator check that it is in correct position.
•
Check gearbox for proper oil level (Approx. 1/4 up on sight glass).
•
We recommend that a small amount of grease be applied to table tilting screw once a month.
•
No lubrication is required for the bearings, they are permanently lubricated.
•
Apply rust inhibitive lubricant to all non-painted surfaces when the machine will not be used
for an extended period of time.
Note: Proper maintenance can increase the life expectancy of your machine.
WARNING:
Make sure the electrical power is disconnected before
working on the machine.
Maintenance should be performed on a regular basis by qualified personnel.
Always follow proper safety precautions when working on or around any machinery.
Summary of Contents for OS-1414
Page 23: ...21 21 PARTS DIAGRAM 1 ...
Page 24: ...22 22 PARTS DIAGRAM 2 ...
