15
15
ASSEMBLY AND SET UP
Attaching the Legs
1. With the help of another individual, raise the
support column to a vertical position as shown
in (fig. 3).
2. Attach each foot with (2) M10x16 button head
screws (provided). The two feet with the safety
tape will be on the front of the brake. (the side
with the Baileigh logo).
3. Tighten the button head screws securely.
4. Carefully lay the brake on its side and then
place in an upright position with a suitable
lifting device.
Tool Tray and Back Gauge Supports
1. Using (3) M8x12 socket cap screws attach
the tool tray to the back of the brake.
2. Lay the rubber mat into the tray.
3. Attach each back gauge bar to the brake with
(2) M8x16 socket capscrews.
4. Tighten securely.
5. Slide a back gauge collar onto each bar as
shown in (fig. 4).
WARNING:
For your own safety, DO NOT connect the machine to the
power source until the machine is completely assembled and you read and
understand the entire instruction manual.
figure 3
figure 4
Back gauge collar
Tool tray
Back gauge
support
Summary of Contents for BB-4816M
Page 12: ...10 10 3 4 1 2...
Page 16: ...14 14 OVERALL DIMENSIONS...
Page 38: ...36 36 NOTES...
Page 39: ...37 37 NOTES...
