23
23
BEND CONFIGURATIONS
BENDING EXAMPLES
Folding Over a Lip
The thickness, width, and length of material are factors to
consider when folding a lip. DO NOT exceed 20ga. (.035”)
for material thickness.
1. With the clamping bar in place and properly secured,
bend the material as far as the bending leaf will allow.
(Normal bending procedure)
2. Now remove the clamping bar, bring up the bending leaf, and
continue the fold as in (fig. 12). (No clamping is required.)
3. To further flatten the material, slide the piece part forward
about 1/2” and use the bar to magnetically clamp it as shown
in (fig. 13)
Return Bends
Hem
Stiffening Rib
Rolled Edge
Closed Channel
Angle Bend
Box
Fins
figure 12
figure 13
Summary of Contents for BB-4816M
Page 12: ...10 10 3 4 1 2...
Page 16: ...14 14 OVERALL DIMENSIONS...
Page 38: ...36 36 NOTES...
Page 39: ...37 37 NOTES...
