19
19
4. Press the ON button to start the motor.
5. Use the UP or DOWN arrow keys on the control pad to increase or decrease the belt speed
as desired for the material and type of grinding being performed.
6. Using a firm grasp to hold the material, place the material on the work support and slide it in
toward the belt allowing the material to remain on the work support. Be aware of any
potential for the belt to catch or snag the material and causing and ejection.
7. When grinding is complete, Press the STOP button to stop the belt.
MATERIAL SELECTION
When selecting materials keep these instructions in mind:
Material must be clean and dry. (without oil)
Material should have a smooth surface so it processes easily.
Dimensional properties of material must be consistent and not exceed the machine capacity
values.
Chemical structure of material must be consistent.
Buy certificated steel from the same vendor when possible.
CAUTION:
It must be determined by the customer that materials being
processed through the machine are NOT potentially hazardous to operator or
personnel working nearby.
Summary of Contents for BG-260-3-110
Page 25: ...23 23 PARTS DIAGRAM...
Page 29: ...27 27 NOTES...
Page 30: ...28 28 NOTES...
Page 31: ...29 29 NOTES...
