20
20
LUBRICATION AND MAINTENANCE
Note
: Proper maintenance can increase the life expectancy of your machine.
Daily Maintenance
Check daily for any unsafe conditions and fix immediately.
Check that all nuts and bolts are properly tightened.
Do a general cleaning by removing dust and debris from on or around the machine.
If available, use compressed air to remove the fine metallic filings from the wheels.
Empty and clean out the spark trap. (as often as needed)
Inspect the abrasive belt for wear and replace if needed.
Check that the side belt guard, top belt guard, eye shield, and emergency stop button are in
good working order.
Weekly Maintenance
On a weekly basis clean the machine and the area around it.
Lubricate threaded components and sliding devices.
Apply rust inhibitive lubricant to all non-painted surfaces.
Clean and inspect the sliding surface underneath the top side of the belt.
Inspect the edges of the rubber contact wheel. Replace the wheel if the edges become
rounded.
Check that the bolts mounting the machine to the floor are secure.
Inspect and tighten any loose fasteners on the machine.
WARNING:
Make sure the electrical disconnect is OFF before working on
the machine.
Maintenance should be performed on a regular basis by qualified personnel.
Always follow proper safety precautions when working on or around any machinery.
Summary of Contents for BG-260-3-110
Page 25: ...23 23 PARTS DIAGRAM...
Page 29: ...27 27 NOTES...
Page 30: ...28 28 NOTES...
Page 31: ...29 29 NOTES...
