8
8
TECHNICAL SPECIFICATIONS
Maximum Pressure
42 tons (38metric tons)
Maximum Hydraulic Pressure
3000psi (20.7MPa)
Table Length
31" (787mm)
Back Gauge Length
19.5" (495mm)
Return Speed
1.1"/sec. (28mm/sec.)
Stroke Distance, Maximum
2" (50.8mm)
Approach Speed
0.9"/sec. (23mm/sec.)
Working Speed
.4"/sec. (10mm/sec.)
Return Speed
0.9"/sec. (23mm/sec.)
Back Gauge
Manual w/DRO
Distance Between Housings
24" (610mm)
Distance From Table To Ram
8.5" (216mm)
Free bending depth inside of frames
16” (406mm)
Bending depth at full width
6.75” (171mm) to die center
Main Motor
2hp (1.5kw) 18A
Power
220V / 60Hz / 15A
Hydraulic Reservoir Capacity
3gal. (11.3L)
Shipping Weight
2100lbs. (953kg)
Shipping Dimensions
48" x 48" x 72" (1220 x 1220 x 1829mm)
TECHNICAL SUPPORT
Our technical support department can be reached at 920.684.4990, and asking for the support
desk for purchased machines. Tech Support handles questions on machine setup, schematics,
warranty issues, and individual parts needs: (other than die sets and blades).
For specific application needs or future machine purchases contact the Sales Department at:
sales@baileighindustrial.com, Phone: 920.684.4990, or Fax: 920.684.3944.
Note: The photos illustrations using in this manual are representative only and
may not depict the actual color, labeling or accessories and may be intended to illustrate
technique only.
Note: The specifications and dimensions presented here are subject to change
without prior notice due to improvements of our products.
Summary of Contents for BP-3142NC
