background image

 

 

SAVE THESE INSTRUCTIONS. 

Refer to them often and use them to instruct others. 

 

 Crush Hazard  

 Wear Eye Protection  

 Read Manual 

 

SAFETY PRECAUTIONS 

 

Metal working can be dangerous if safe and proper operating procedures are not followed. As with all machinery, 
there are certain hazards involved with the operation of the product. Using the machine with respect and caution 
will considerably lessen the possibility of personal injury. However, if normal safety precautions are overlooked or 
ignored, personal injury to the operator may result. 
Safety equipment such as guards, hold-downs, safety glasses, dust masks and hearing protection can reduce your 
potential for injury. But even the best guard won

’t make up for poor judgment, carelessness or inattention. 

Always 

use common sense 

and exercise 

caution

 

in the workshop. If a procedure feels dangerous, don’t try it. 

REMEMBER:

 

Your personal safety is your responsibility

 

 

 

Dear Valued Customer: 

• 

All Baileigh machines should be used only for their intended use. 

• 

Baileigh does not recommend or endorse making any modifications or alterations to a Baileigh machine. 
Modifications or alterations to a machine may pose a substantial risk of injury to the operator or others and may 
do substantial damage to the machine. 

• 

Any modifications or alterations to a Baileigh machine will invalidate the machine's warranty. 

P

LEASE ENJOY YOUR 

B

AILEIGH MACHINE

!

 

....P

LEASE ENJOY IT 

SAFELY! 

 
1. 

FOR YOUR OWN SAFETY, 

Read, understand and follow all instructions in this manual. Misuse of vise can 

cause serious injury to the  operator. 

2. 

Only trained and qualified personnel can operate this machine. 

3.  Bolt to work surface at all mounting locations using mounting flanges provided on base. 

4.  Be sure vise is locked in the swivel direction before attempting to mount workpiece between jaws. If equipped. 

5.  Be sure workpiece is clamped securely between jaws. 

6.  Do not over tighten

—vise can develop a large clamping force. Use only force which is needed. 

7.  Do not try to hold workpieces which exceed the jaw capacity of vise. 

8.  Do not use vise as a press to assemble or disassemble objects. 

9.  Keep hands clear of jaws. 

WARNING:

 FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL 

INJURY 

Summary of Contents for BV-5I









Reviews: