15
15
Removing Rolled Piece Part
1. Turn the two bottom roll bolts (A) counterclockwise (ccw) which will lower the bottom front
roll.
2. Grasp the clamp top roll lock handle head as shown in (fig. 5), and pull out, (fig. 6).
3. The top front roll can now be pivoted out (fig. 7).
4. Remove the piece part from the roll and return the roll to the rest position.
5. Slide the clamp handle head back in to lock the top roll.
6. You are now ready to roll another piece.
figure 5
figure 6
figure 7
Summary of Contents for SR-5016M
Page 20: ...18 18 PARTS IDENTIFICATION DRAWING...
Page 23: ...21 21 NOTES...
