17
ESSENCIA DROP-IN - installation
www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
ESSENCIA
®
COLLECTION - DROP-IN MODELS
INSTALLATION INSTRUCTIONS
UNDERMOUNT INSTALLATION WITH REMOTE MOUNTING OF TURBINE
ESSENCIA DESIGN 7438
5
BATH UNDERMOUNT – BOX FINISH
WARNING
• Leave the plastic film on the bath and place a drop-cloth
a cover in the bath during installation.
• Cut the bath contour on the support panel according to
the
EXTERIOR contour line
drawn on the installation template
AND LEAVE an additional 1/4” (0.6 cm) of clearance.
• Check that the space left on top of the support panel leaves a
1/16’’ (0.2 cm) clearance
with the top.
WARNING
• Keep minimum 22” x 18” (55 cm x 46 cm)
access to perform electrical & plumbing
connections and facilitate repairs.
• An air intake of at least 2“ x 4” (5 cm x 10 cm)
is necessary to ensure proper functioning
of the turbine.
5
BATH UNDERMOUNT – SUPPORT FINISH
Add a full panel or sections at the perimeter
of the bath to provide a support to the finish coating.
