11
ESSENCIA DROP-IN - installation
www.bainultra.com
Some products, specifications, and services mentioned in this manual are described in pending patent applications or are protected by patents.
ESSENCIA
®
COLLECTION - DROP-IN MODELS
INSTALLATION INSTRUCTIONS
DROP-IN INSTALLATION WITH REMOTE MOUNTING OF TURBINE
ESSENCIA OVAL 7236 & DESIGN 7438
WARNING
• Cut the contour of the bath on the top panel
following the
“DROP-IN” cut line
drawn on
the installation template, at 1“ (2,5 cm) from
the outside edge of the bath area.
• Keep an access to perform electrical & plumbing
connections.
• Keep minimum 22” x 18” (55 cm x 46 cm)
access to perform electrical & plumbing
connections and facilitate repairs.
• An air intake of at least 2” x 4” (5 cm x 10 cm)
is necessary to ensure proper functioning
of the turbine.
WARNING
• Once the bath is placed on the floor, it is recom-
mended to have a
clearance of 1/16” (0.2 cm)
between the deck of the bath and the top
of the box.
Reposition the bath in the box opening.
2
DROP-IN CONSTRUCTION
(cont’d)
Cover the edge and the contour of the box with the FINISH.
Finish
