C
O
N
T
R
O
L
S
CONTROLS
|
TMU & TMSU
TM
addendUM To The owner’S ManUal
www.bainultra.com
Printed in Canada. Copyright © January 2013 BainUltra Inc. all rights reserved. 45100572
Some products, specifications, and services mentioned in this manual are described
in pending patent applications or are protected by patents.
aRomacloUd
tm
installation
aroMaCloUd
TM
If performing a home installation of aromaCloud
instead of a BainUltra factory installation, consider
the following points when selecting the installation
position:
• aromaCloud must be installed on bath decking;
no other position is acceptable.
• The Bainultra recommended position.
• The position of controls, if applicable.
• The position of fittings.
• The position of tiling flange and bath skirt if present.
• The desired direction with respect to the bath and
the room entrance.
• The possibility that the podium will require an ad-
ditional cutout to house aromaCloud.
note that factory installation by BainUltra will always
be performed for freestanding baths whose decking
has been modified to house aromaCloud.
loCaTIon
1
Push wiring through drilled holes.
2
Connect the aromaCloud to the
transformer underneath the bath.
3
remove protective film from watertight
seal.
4
Fix on the bath deck.
AromaCloud
TM
Water Level
Sticker on the Exterior Side.
1
Jigsaw with finishing blade.
2
drill.
3
1/4 in Bit.
4
adhesive masking tape.
InSTallInG The aroMaCloUd
reQUIred ToolS
refer to the drilling template
on the last page
for the
location and diameter of the hole.
after drilling, verify that there is a 1/16 inch gap
between the hole and the aromaCloud housing.
drIllInG
in addition to p. 54
13
of owner’s Manual
